CareerExamPro

NERC Standards (BAL/TOP/EOP), CEM & FE Engineering practice questions

20 questions from the NERC RC/TO/BA, CEM & FE Engineering practice test.

Start practising

NERC Standards (BAL/TOP/EOP), CEM & FE Engineering practice drill

10 realistic exam questions, graded as you go, with the exact rule or statute citation for every answer. Start free, no sign-up.

Sample questions

Under NERC Reliability Standard BAL-001-2 (Real Power Balancing Control Performance), what are the two mandatory compliance criteria governing a Balancing Authority's long-term CPS1 performance and real-time Balancing Authority ACE Limit (BAAL)?

  1. CPS1 must remain >= 90% on a rolling monthly basis, and clock-minute ACE must not exceed BAAL for more than 15 consecutive minutes.
  2. CPS1 must remain >= 100% on a rolling 30-day basis, and clock-minute ACE must return to zero within 10 minutes of any BAAL excursion.
  3. CPS1 >= 100% over a rolling 12-month period, and clock-minute ACE must not exceed BAAL for > 30 consecutive minutes.
  4. CPS1 must remain >= 95% over a rolling 12-month period, and BAAL applies only when Interconnection frequency falls below 59.95 Hz.
Show the answer

C. CPS1 >= 100% over a rolling 12-month period, and clock-minute ACE must not exceed BAAL for > 30 consecutive minutes.

NERC BAL-001-2 Requirement R1 mandates that each Balancing Authority achieve a Control Performance Standard 1 (CPS1) score of at least 100% over every rolling 12-month period. Requirement R2 establishes the dynamic, frequency-dependent Balancing Authority ACE Limit (BAAL_Low and BAAL_High): a BA's clock-minute average ACE may not exceed its BAAL for more than 30 consecutive clock-minutes.

Reference: NERC BAL-001-2 (Real Power Balancing Control Performance), Requirements R1 & R2

Under NERC TOP-001-5, TOP-002-4, and IRO-008-2, how do Real-Time Assessments (RTAs) and Next-Day Operational Planning Analyses (OPAs) work together to maintain Bulk Electric System reliability?

  1. An OPA is executed every 15 minutes by the SCADA EMS, whereas an RTA is performed once daily before 14:00 to validate day-ahead market schedules.
  2. An OPA assesses next-day conditions for Operating Plans, while an RTA runs at least every 30 minutes for real-time reliability.
  3. An RTA is required only after an IROL exceedance occurs, whereas an OPA is conducted weekly to update seasonal transmission thermal ratings.
  4. Both OPAs and RTAs are delegated exclusively to Balancing Authorities, while Transmission Operators perform switching studies only during emergencies.
Show the answer

B. An OPA assesses next-day conditions for Operating Plans, while an RTA runs at least every 30 minutes for real-time reliability.

NERC TOP-002-4 and IRO-008-2 require Transmission Operators and Reliability Coordinators to perform an Operational Planning Analysis (OPA) to assess whether next-day planned operations can meet reliability criteria and to develop Operating Plans for identified SOL/IROL issues. In real time, TOP-001-5 (R13) and IRO-008-2 (R4) mandate performing a Real-Time Assessment (RTA) at least once every 30 minutes to evaluate current system conditions and contingencies.

Reference: NERC TOP-001-5 (R13), TOP-002-4 (R1–R2) & IRO-008-2 (R1, R4)

During a regional heatwave, a Balancing Authority executes 140 MW of emergency firm load shedding to maintain Bulk Electric System continuity. How do NERC EOP-004-4 and DOE Form OE-417 reporting deadlines interact for this event?

  1. DOE OE-417 requires a 1-hour Emergency Alert for >= 100 MW firm load shedding, which also satisfies EOP-004-4's 24-hour deadline.
  2. NERC EOP-004-4 prohibits using DOE Form OE-417 for load-shedding events and mandates filing two separate written reports within 72 hours.
  3. No federal or NERC event report is required unless involuntary firm load shedding exceeds 500 MW for more than two continuous hours.
  4. DOE Form OE-417 allows up to 24 hours for firm load shedding of any magnitude, whereas NERC EOP-004-4 enforces a strict 15-minute reporting window.
Show the answer

A. DOE OE-417 requires a 1-hour Emergency Alert for >= 100 MW firm load shedding, which also satisfies EOP-004-4's 24-hour deadline.

Under NERC EOP-004-4 Requirement R2, Responsible Entities must report Attachment 1 events by the later of 24 hours of recognition or the end of the next business day (4:00 PM local), and may fulfill this requirement by submitting either Attachment 2 or DOE Form OE-417. Because emergency firm load shedding of >= 100 MW triggers DOE Form OE-417's stricter 1-hour Emergency Alert window, filing OE-417 within 1 hour satisfies both DOE and NERC EOP-004-4.

Reference: NERC EOP-004-4 (Event Reporting), Requirement R2 & Attachment 1 / DOE Form OE-417

Other topics